ØApplications
Ø It is widely applicable in the field of HDD manufacturing, Integrate the measurement with
tweaking of Arm Height and Pitch, Both for ACA parts and APFA part (Bearing installed)
Ø
ØDatum conversion between Bearing and Arm for Tweaking or Measurement
ØDifferent model of Laser scanner can be selected
ØESD material and Ionizer to meet Anti-static requirement
ØAutomatic Position conversion to meet different products requirement
ØSoftware featured auto-study and self analysis
ØBarcode scanning and ET can be selected
Ø Specifications
Item
|
Spec.
|
Item
|
Spec.
|
Tweaking finger travel ranges
|
12×30×50 mm
|
Repeatability of Z axis
|
0.003 mm
|
Moving parallelism of Y1 axis
|
0.01 mm
|
Max. move speed of Z axis
|
200mm/sec
|
Moving parallelism of Y2 axis
|
0.005mm
|
Max. loading of Y1 / Z axis
|
5 kg / 10KG
|
Min. resolution of Y1 / Y2 axis
|
0.0008 mm
|
UPH
|
200
|
Repeatability of Y1 / Y2 axis
|
0.01mm
|
Power supply & Air pressure
|
220V/50Hz
0.7Mpa(Max.)
|
Max. speed of Y1 / Y2 axis
|
100 mm/sec
|
Size / Weight
|
70×55×140cm(L×W×H) / 70 kg
|
ØSoftware
ØData-processing interface
Pitch, Arm Height, Barcode, and Result of ET testing is on display
ØParameter setting interface
The parameter for measuring & tweaking can be set freely here
ØGenerate Excel automatically
Easy access to the back-end data system, Easy traceability
ØOn line SPC
Provide on line SPC system for
the Engineering Analysis, Easy access to machine monitoring system.